Deutsch  English 

HABiol UV wood care oil

print

HABiol wood care oil– tripple effect – simple to use


Product description


HABiol UV wood oil is a systematic further development from HABiol. HABiol UV wood oil counteracts the deterioration of wooden surfaces due to sunlight. It significantly reduces damage due to increasingly aggressive UV light. Not only does it enable effective wood protection, but also conserves the natural colour of the wood at the same time, thus ensuring value maintenance.


HABiol UV is a purely biological and antibacterial natural wood finish used for the impregnation, care and protection of natural wood surfaces in the indoor and outdoor area.

he main components of HABiol include cold-pressed linseed oil as well as natural tree resins that soak into the pores of the wood, thus preventing the penetration of liquids and contaminants to a large extent. The deep impregnation maintains the natural character of the wood. Solid wood panels breathe, are not electrostatic and have an antibacterial effect. In addition, solid wood can absorb moisture and also release it again if the humidity is low. This, in turn, ensures a healthy room climate.
Well-impregnated work surfaces increase the service life and conserve the natural character of the wood over the long term.


HABiol is tested according to DIN EN71-3 Safety for toys and according to § 31 of the German Food and Feed Act (LFGB), the permit for foodstuff commodities. This means HABiol can be used without hesitation for childrens' toys and for foodstuff commodities (e.g. wooden cutting boards, kitchen worktops made of solid wood, etc.).


HABiol also increases hygiene, especially in hygienically sensitive areas such as the kitchen, bathroom and nursery as well as for furniture, parquet floors and wooden toys, due to its germ reducing effect.


In summary, the following advantages of HABiol UV can be highlighted:
Easy to use
Low consumption (consumption for initial treatment approx. 1l /15 m²)
Extremely short drying time
Biological
Antibacterial
Colour-neutral
Long-term stability
Suitable for all types of wood and all untreated wooden surfaces
Seamless finish                                                                                                                                             UV protection diminishes yellowing, greying and darkening                                                                               Be convinced by this biological wood oil.


Ingredients
The main component of HABiol is cold, pressed linseed oil. Greater spreading is achieved by adding natural resins, viscosity and drying accelerators.


Area of application
Suitable for indoor and outdoor use


Instructions for care
Natural wooden surfaces should be cleaned and cared for regularly so they can be conserved over the long term.
1. Thoroughly clean the surface to be oiled
2. Remove water-soluble dirt with a wet cloth, and dry well
3. Remove water insoluble, stubborn dirt with non-woven abrasive with a grain size of 180-300
4. Treat the clean, dry, dust-free surface with HABiol or HABiol-UV. With a lint-free cloth, rub and polish approx. 5 g/m² over a large surface area. Do not leave any wet patches on the surface, they lead to unintended surface shine.
5. This does not generally need to be repeated.



Shopping Cart

You have no articles inside your cart, yet

Shopping Cart »

welcome back

e-mail-address:
password:
lost password?

Habiol

Haresil-Holzschutz


PayPal Logo


Klarna

habiol-shop

Logo Händlerbund